How to Set Up and Use Your Smart LED Light: Remote, App & Voice Control Guide

Introduction

Modern smart lighting should be effortless to control. Whether you prefer a physical remote, a smartphone app, or voice commands through a smart home assistant, our LED lights are designed to work seamlessly with all three methods. This guide walks you through everything you need to know to get started.

Part 1: Using the 13-Key Remote Control

Your light comes with a 13-key remote that gives you full manual control over every feature:

• Power: The LED Power Master Switch turns the entire fixture on or off.
• Auxiliary Light: Toggle the secondary light source independently with the A on/off button.
• Brightness: Adjust brightness levels steplessly — from full intensity down to a gentle sleep-mode glow.
• Color Temperature: Cycle through warm to cool white tones to match your mood or task.
• Color & Effects: Access dynamic color modes and scene lighting with dedicated color control buttons.
• Group Control: Use the group control function to sync multiple lights simultaneously for whole-room ambiance.

Pairing the Remote

1. Turn on the wall switch to power the lamp.
2. Press the SETUP key within 5 seconds — the lamp will blink to confirm successful pairing.

Clearing the Code (if needed)

• If the driver is a standard LED controller: press the wall switch 6 times continuously; the light flashes once on the 7th press to confirm reset.
• If the driver is "Tmall Elf AI Alliance" type: press the wall switch 10 times continuously; the light flashes once on the 11th press.

Part 2: Connecting to the Smart Control App

For full smartphone control, download the SC Intelligent Control app:

1. Open WeChat and scan the QR code on your product manual.
2. Select your preferred language (Chinese, English, or Russian).
3. Download the SC Intelligent Control app — available on both Android and Apple devices.

Bluetooth Pairing

1. Enable Bluetooth on your phone.
2. Turn the light on, then open the SC app and tap the desktop icon (Figure 1).
3. Turn the wall switch off, wait 5 seconds, then turn it back on.
4. Keep your phone within 8 meters of the light fixture.
5. Tap the pairing button in the app — the lamp will flash once to confirm successful pairing.

Part 3: Tmall Elf (Smart Speaker) Voice Control

Compatible with Tmall Elf smart speakers for hands-free control:

1. Restore factory settings first if the lamp was previously connected to another device.
2. Say: "Hello Tmall, find the device."
3. Tmall Elf will respond: "The lamp has been found — do you want to connect it?"
4. Say "Yes" or "Connect" — the light will flash three times to confirm.

Troubleshooting Connection Issues

• Already bound to another Elf: Restore factory settings and try again.
• Weak signal or distance too far: Move the Tmall Elf closer to the light or improve your Wi-Fi/Bluetooth signal.
• Module or driver damage: Contact our support team for a replacement.

Conclusion

With three flexible control methods — remote, app, and voice — your GOODAPA smart LED light adapts to however you like to live. Whether you're setting the mood for dinner, winding down for sleep, or syncing your whole home's lighting, setup takes just minutes.

Have questions? Contact our support team or leave a comment below.