How to Install Your Globe Moooi Raimond Pendant Light — Step-by-Step Guide
⚠️ Safety Warnings
- Do not install on inclined or unstable ceilings.
- Do not use in outdoor, high temperature, or humid environments.
- Confirm that the power has been cut off before installation and maintenance.
- Do not use in an environment where the voltage exceeds ±10%.
- Please use our accessories only.
- Please contact the dealer if there is any problem with the lamp.
Specifications
- Power Supply: 12V DC
- Input: AC 110-220V
- Max Voltage Deviation: ±10%
Parts List
| Part | Description |
|---|---|
| Chassis | Ceiling base plate |
| Expansion screw | For anchoring to ceiling |
| Bracket | Single or cross bracket |
| Self-tapping screw | For securing bracket to chassis |
| Power supply unit | 12V DC driver (built-in) |
| Globe shade | Mesh sphere lampshade |
| Rubber adjuster | For wire length adjustment |
Installation Steps
Step 1 — Cut Power
Turn off the 220V power supply at the circuit breaker before starting.
Step 2 — Connect Wiring to Driver
Connect the 220V AC input wires to the power supply unit:
- L (AC IN) → Live wire
- N → Neutral wire
- ⊕ → Earth / Ground
Output terminals:
- 12V DC+ → Positive
- 12V DC− → Negative
Step 3 — Install the Mounting Bracket
- Drill holes in the ceiling and insert the expansion screws.
- Attach the bracket (single or cross, depending on ceiling type) to the chassis using self-tapping screws.
- Secure the chassis firmly to the ceiling.
Step 4 — Adjust Wire Length
Use the rubber adjuster screw on the wire to set the hanging height of the lamp to suit your ceiling height.
Step 5 — Fix the Chassis
Tighten all screws to secure the chassis in place. Ensure the fixture hangs level.
Step 6 — Restore Power & Test
Restore power at the circuit breaker and test the lamp to confirm proper operation.
Care & Maintenance Notes
- Clean with a dry cloth only.
- Do not use water or chemical cleaners on the mesh globe.
- For any malfunction, contact your dealer — do not attempt to repair the driver unit yourself.